91视频在线观看,99精品丰满人妻无码一区二区,一区二区三区中文字幕,老熟女太老了88∧V,无码精品人妻一区二区三区漫画

Welcome to the website of Qingdao Hanao Machinery Co., Ltd.! Chinese  |  English
Current position: Home > News> Details

Code description of common raw materials for metal stamping parts

Issuing time:2019/7/23 11:57:59

SPCC: (Cold rolled carbon steel sheet) This material can be divided into single light and double light. This material is very easy to scratch and rust. Wear gloves when handling. If it is stored for a long time or after cutting, apply anti-rust oil to prevent rust and scratches.
 
Uses: Home appliances, computer casings and some door panels and panels, Shanghai Baosteel can be consumed, but the quality of zinc layer is much worse than foreign countries.
 
SECC: (electrolytic lead-lead galvanized steel sheet) Because this material has a lot of origin, it is roughly divided into:
 
1. Taiwan (中鋼) 2. Japan (NKK, Nippon Steel, Kobe) 3. Made in Korea, because there are many types, we need to pay attention when selecting materials. It is resistant to fingerprints, has excellent corrosion resistance, and adheres to the processability of cold rolled sheets.
 
SGCC: (Hot-dip galvanized steel sheet) Taiwan's material number is GI material, and the appearance is divided into two types: pattern and no pattern. There are no steel mills in the world that can produce excellent materials, mainly exported from abroad. Taiwan has chinasteel and shengyu steelcorporation.
 
Main characteristics: 1, corrosion resistance; 2, lacquerability; 3, formability; 4, spot weldability.
 
Uses: Very common, small household appliances, good surface, but compared to SECC, its price is more expensive, many manufacturers to use the SECC to save money.
 
Classification of zinc flower points: normalregular spangle and minimized spangle
 
Stamping die design: Common stamping material code and name summary, engineer's hand
SPHC: (Hot-rolled steel sheet) is generally called hot-rolled sheet or black iron sheet. This material has high hardness and is mainly used for the manufacture of simple process molds.
 
SPTE: (tin plate, commonly known as tinplate) This material is extremely rusty and easily scratched.
 
SGLD: (aluminum-zinc plated steel) is a multi-phase alloy material that includes aluminum-rich and zinc-rich. Due to the characteristics of aluminum and zinc, it has superior performance to SGCC.
 
Main characteristics: 1, corrosion resistance, its talent is much higher than SGCC; 2, heat resistance; 3, heat conduction and heat reflection; 4, formability; 5, weldability.
 
Uses: Used in some places that require good reflection, such as the reflector inside the oven, the reflector of the electric pot.

SK: (carbon tool steel) commonly used SK materials are SK-3, SK-5, SK-7 three.
 
AL: (Aluminum) is easy to scratch and crush. Common models are 1050, 5020. This material has a grain and is easy to break when bent.
 
CU: (copper) has bronze, phosphor bronze, brass, and red copper (laser cutting is difficult).
 
Stamping die design: Common stamping material code and name summary, engineer's hand
SUS: There are 301, 302, 304, 430, etc. in the market. 301 has good elasticity, is hard, non-magnetic, and has a grain. Generally, it is necessary to rotate 45 degrees when cutting, so as not to break during bending. 304 has poor elasticity, is soft, non-magnetic, and has no grain. 430 is magnetic.
 
Color distinction:
 
SPCC looks very dark, -SB is so bright, so it is called Jinguang board.
 
SGCC I have seen most of it is bright, small zinc flower, in fact, it is very good to see the zinc flower, the big zinc flower is very obvious, you can see the hexagonal flower block.
 
SGLC is similar in color to SGCC, but it has very small spots, which is great.
 
SALD I have seen much worse than SGCC, but I think it is brighter and sometimes difficult to distinguish.
 
Stamping die design: Common stamping material code and name summary, engineer's hand
SECC is easy to distinguish between these, it is the kind of gray and the above four are very different and easy to distinguish
 
SECC and SGCC, Taiwan is called EG, GI material. The EG is electroplated to form a zinc layer, and the GI is a zinc plate which is immersed in a molten zinc. Therefore, EG has much better galvanizing effect than GI, and the moldability is also good. The size of the zinc flower and the thickness of the zinc layer can indicate the quality of the galvanizing. The smaller the size (to ZEROSPANGLE), the thicker the better. Of course, don't forget to let manufacturers add anti-fingerprint treatment.

Copyright:Qingdao Hanao Machinery Co., Ltd. 2019 All Rights Reserved  Technical Support: wangsouwangluo
中文字幕精品视频观看视频 | 国产91精品秘 入口福利姬竹菊 | 精品3d里番一二三区视频 | 亚洲熟妇色XXXX凹凸一区 | 日韩精品在线一区二区 | 白咲碧绝顶高潮潮喷失禁 | 综合久久,综合色蜜桃 | 日本人妻A片成人免费看片 中文字幕无码久久精品青草 | 中国极品媚黑合集视频 | 特级西西人体444www高清大 | 柚子TV成人免费视频网站 | 黄污视频网站在线观看污污污网 | 黄色视频在线观看高清无码 | 爽灬爽灬爽灬毛及A片高潮白水 | 色婷婷精品久久二区二区蜜 | 国产又粗又猛又黄又爽无遮挡 | 国产一级姪片A片高潮 | 国产成人精欧美黄色三级片精品 | JIZZ国产精品酒在线观看 | 免费在线观看视频网站黄色的话说 | 女人高潮一级A片黄毛 | 极品黑色丝袜自慰喷水池 | 中文字幕亚州无码强奸乱伦亚州有码 | 东北免费黄色电影网站 | 久久久久久久久久久性爱 | 国产成人天码免费视频 | 一级老太卖婬免费视频 | **夜色精品国产欧美乱 | 国产高潮抽搐喷白浆午夜 | 久久无码一区二区三区 | 一区二区三区毛A片特级 | 国产熟妇无码A片AAA毛片视频 | 在线免费观看一级毛片 | 人妻熟女无套内射性爱视频 | 精品乱码一区二区三四 | 国产乱人偷精品人妻A片免费网址 | 亚洲AV成人一区二区三区观看 | 国产精品国产三级国芦专播精品人 | 久久久久久久久久久av | 久久夜色精品国产欧美乱极品 | 高清无码人妻一级性爱视频 |